Case study · Industrial remediation

Nigeria | Industrial Remediation in the Oil & Gas Sector

Environmental remediation activities carried out in Nigeria involved oil & gas industrial sites affected by high levels of hydrocarbon contamination and widespread spills impacting both soil and water surfaces. Operating in such a challenging environment required a rapid response to contain pollutants while optimizing the management of materials used throughout the recovery process.
Industrial remediation
Case type
Oil & gas site
Site
Hydrocarbons
Pollutant
Wringing system
Method
Sector
.Challenge

Why is large-scale oil contamination hard to clean up?

The areas involved in the project were characterized by significant accumulations of oily products resulting from refining and crude oil extraction activities. The widespread nature of the contamination required solutions capable of delivering high absorption capacity, fast deployment, and operational continuity even under demanding conditions.

One of the main challenges concerned the management of contaminated materials. In remediation projects of this scale, the use of traditional single-use absorbents can generate large volumes of hazardous waste, increasing transportation, storage, and disposal costs. In addition, the frequent replacement of absorbent materials can slow down remediation activities and reduce overall operational efficiency.

The objective was therefore to implement a solution capable not only of effectively recovering hydrocarbons, but also of reducing material consumption, minimizing waste generation, and maintaining high productivity throughout the cleanup operations.

1
Operator handling an absorbent pad
2
Boom containing the pollutant on the water
3
Water with oily accumulations
Field note · Reading the photo

The pad (1) absorbs oil directly from the surface, while the boom (2) stops the pollutant from spreading on the water (3). The FF15 wringing system then recovers the oil and lets the materials be reused, with less waste.

Field note · Reading the photo

The pad (1) absorbs oil directly from the surface, while the boom (2) stops the pollutant from spreading on the water (3). The FF15 wringing system then recovers the oil and lets the materials be reused, with less waste.

.Intervention

How were the hydrocarbons recovered and the waste reduced?

The remediation activities were carried out using FoamFlex technologies through the combined deployment of CRP20 absorbent pads, FF booms, and the FF15 wringing system.

A

Recover with absorbent pads

The absorbent pads were used for the direct recovery of hydrocarbons from contaminated surfaces.

B

Contain with booms

The booms helped contain and control the spread of pollutants in areas affected by water and liquid accumulations.

C

Wring and reuse

The integration of the FF15 system proved to be a key factor in the success of the operation. The ability to wring out the absorbent materials and recover the absorbed liquid enabled repeated reuse of FoamFlex products, significantly reducing the need for replacement.

.Results

What were the results in Nigeria?

Lower waste volumes

This approach helped minimize waste volumes, optimize resource utilization, and improve the overall efficiency of the remediation process.

Suited to extensive contamination

The project demonstrated how reusable absorbent solutions can be used in scenarios involving extensive contamination and large volumes of hydrocarbons requiring recovery and management.

Fast recovery onsite

FoamFlex enabled operators to absorb and recover hydrocarbons quickly, simplifying remediation operations and improving efficiency onsite.

.Products used

Which products were used?

CRP20 absorbent pads, FF booms and the FF15 wringing system. Our product range includes those used in the case study, and you can explore each solution in detail.

Reusable

Modular vertical barrier system with FoamFlex hook-on: effectively absorbs and contains oils and hydrocarbons, even in wave or turbulence conditions.

Price on request

Manual wringer for FoamFlex: fast reuse, no electricity needed, efficient oil recovery.

2.440,00 €incl. VAT
See how it works
Reusable

Reusable absorbent carpet with velcro and handles, ideal for all types of spills and compatible with FF-WRING.

Price range: 156,16 € through 268,40 €incl. VAT
.FAQ

Frequently asked questions

The intervention focused on the remediation of areas contaminated by hydrocarbons in an Oil & Gas operational environment.

The remediation activities had to be performed in highly contaminated areas where rapid hydrocarbon recovery was essential to limit environmental impact.

FoamFlex enabled operators to absorb and recover hydrocarbons quickly, simplifying remediation operations and improving efficiency onsite.

.Related cases

More case studies

Talk to us about your own spill response

A T1 Solutions specialist helps you choose the right products for your site.